header

 

 



 

Clean Master Parts Washers

Model KT-4000 up to 110 degrees

Features:

  • Corrosion resistant heavy-duty pump
  • Heavy-duty roto-cast thermoplastic cleaning basin – large cleaning capacity
  • Two removable stainless steel shelves
  • Parts washer completely supported by heavy-duty stand
  • Ground fault circuit interrupter for added shock resistant safety
  • Filter system – prolongs fluid life - Filter cartridge p/n 7062
  • Soaking capacity up to 30 gallons
  • Spigot with fluid control valve
  • Designed for non-flammable water-based cleaning solutions
  • Heater thermostatically controlled-preset to 110 degrees
  • Spring loaded stainless steel lid closure with “fire link”
  • Low level fluid sensor
  • Mechanical agitation – 15 spray heads with fluid control valve
  • Dual switches – heater and pump
  • Flow-thru brush with adjustable fluid control
  • csa and nrtl/c approved
  • Optional oil skimmer p/n 7500

 Dimensions:

Tank Dimensions: 26”W x 36”L x 18”D
Overall Dimensions: 26”W x 45”L x 37-1⁄2”H
Weight: 155 lbs.

 

Aqueous Portable Brake Washers

Features:

  • Heavy-duty air or electric pump
  • Flo-thru brush - makes your cleaning job fast and easy - fluid adjustment valve
  • Convenient flexible metal spigot for those tough cleaning jobs - features "on-off" valve
  • Dual filter system - easy to replace asbestos filter bag p/n 7304
  • Replaceable oil sorbent filter - placed in tank to soak up oil when separated from aqueous-based cleaners p/n 7305
  • Easy portability - uses 4 swivel casters
  • Stainless steel cleaning basin with "fire protective" lid drain closure
  • Roto-cast molded fluid holding tank for mineral spirits or water-based cleaners - holds 8 gallons
  • Adjustable Work Levels 24" to 60"
  • Cover Basin - used as a catch basin - for use on alignment lifts and ramp lifts or placed on floor

KT 4000

 

KT 4000 Prefilter & Filter

 

 

KT 1435

 

 

   

Power Master Parts Washers

Model KT-9000H

Features:

  • KT9000H features 2-4KW stainless steel heaters
  • Stainless steel lid automatically opens and closes
  • Adjustable agitation stroke engineered for trouble free parts cleaning
  • Parts cleaning shelf automatically rises to the top for easy loading
  • KT9000H-SS load capacity 260 lbs
  • KT9000H-1SS load capacity 340 lbs
  • Operates with 100 PSI or less
  • 2 removable steel grate shelves designed for easy cleaning
  • KT9000H series comes complete with automatic adjustable thermostat
  • Soaking capacity up to 100 gallons; will operate on 65 gallons
  • Optional FS2200 filter system

Dimensions:

Tank Dimensions: 27.5”W x 48”L x 32”D
Weight: 550 lbs.

 

SprayMaster FrontLoading Cleaning Systems

Model KT9800SS Save Time Save Money

 

Dimensions: 54.5”W x 60”L x 77”H
Voltage: 220V, 3 phase
Weight: 925 lbs.

 

 

 

KT 9000H

KT 9800SS

  • 40” turntable
  • 52” inside work height
  • 13.5 KW heating capacity (3 heaters)
  • Adjustable cycle timer 0 to 60 minutes
  • Stainless steel gasket-free front door provides maintenance free operation
  • Large 125 gallon capacity
  • 12” stainless steel disc skimmer with 45 minute timer
  • Large 1250 lb. capacity
  • Liquid level sensor automatically turns off heaters before they burn out
  • 22 stainless steel nozzles
  • High volume 5.0 H.P. pump 140 GPM at 50 PSI
  • Adjustable heat timer allows you to keep solution hot overnight
  • 220V 3 phase voltage
  • All stainless steel tank and cabinet
  • Center spray bar folds down for smaller parts
  • Optional 7-day timer feature P/N 5505
  • Optional automatic fill feature P/N 5465
  • Removable tree rack standard

 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Ipax Products  
Copyright © Ipax of California, Inc. All right reserved.